Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS
TROUBLE! SAW WILL NOT START
WHAT'S WRONG?
1.Saw not plugged in.
2.Fuse blown or circuit breaker tripped. 2.Replace fuse or reset
3.Cord damaged.
4.Brushes worn out.
TROUBLE! SAW MAKES UNSATISFACTORY CUTS
WHAT'S WRONG?
1.Dull blade.
2.Blade mounted backwards.
3.Gum or pitch on blade.
4.Incorrect blade for work being done.
TROUBLE! BLADE DOES NOT COME UP TO SPEED
WHAT'S WRONG?
1.Extension cord too light or too long.
2.Low house current.
TROUBLE! MACHINE VIBRATES EXCESSIVELY
WHAT'S WRONG?
1.Stand or bench on uneven floor.
2.Damaged saw blade.
For assistance with your machine, visit our website at www.deltamachinery.com for a list of service centers or call
the DELTA Machinery help line at 1-800-223-7278 (In Canada call 1-800-463-3582).
TROUBLESHOOTING
WHAT TO DO...
1.Plug in saw.
circuit breaker.
3.Have cord replaced by
authorized service center.
4.Have brushes replaced
by authorized service center.
WHAT TO DO...
1.Replace blade.
2.Turn blade around.
3.Remove blade and
clean with turpentine.
4.Change the blade.
WHAT TO DO...
1.Replace with adequate
size cord.
2.Contact your electric
company.
WHAT TO DO...
1.Reposition on flat level
surface.
2.Replace blade.
25
Publicité
Table des Matières
