Battery Installation & Safety - Kapro Prolaser Cross 862 Manuel D'utilisation

BATTERY INSTALLATION & SAFETY
vel. 1. To open the batteries cover (#5). Press the release button
(#10) at the base of the laser and pull out the battery cover.
2. Insert 2 new AA batteries of the same brand according to
the polarity diagram on the inside of the battery compartment.
3. Hook and push the battery cover in place.
h as
can
um
If the laser level will not be used for a long
period, remove the batteries from the battery
compartment. This will prevent batteries from
leaking and corrosion damage.
NOTE
AA x 2
7