Dyna-Glo DGP552SSP Mode D'emploi page 13

ASSEMBLY INSTRUCTIONS
13. Attach the right side burner control panel (G)
to the right side burner body assembly (E) with
three M6x16 bolts (AA).
Hardware Used
AA M6x16 Bolt
14. Insert two M6x16 bolts (AA) in right side of grill
body (C) as shown, leaving 5mm of threads
exposed. Align key hole in right side table
assembly (E) with the two bolts just inserted in
the grill body (C), and insert two M6x16 bolts
(AA) in the remaining holes in the grill body (C).
Adjust right side table assembly (E) correctly,
then tighten all bolts.
Hardware Used
AA M6x16 Bolt
13
x 3
14
x 4
13
AA
AA
G
G
E
E
C
E
E
AA
AA