Uline H-9855 Mode D'emploi page 2

MOVING TABLE
1. To avoid table tipping over, push from end of folded
table, facing the center lock rod. (See Figure 2)
CAUTION! Pushing from the flat table side
may cause tipping.
Figure 2
OPENING TABLE TO IN-USE POSITION
1. Locate storage latch. Pull out to release table from
storage position. (See Figure 3)
Figure 3
2. Push out on stools and gently lower table down.
Position table as desired. (See Figure 4)
Figure 4
PAGE 2 OF 6
OPERATION
CLOSING TABLE TO STORAGE POSITION
1. Locate the lock rod with one hand and place other
hand on table edge. (See Figure 5)
2. Slightly push down on middle of tabletop while
raising the lock rod toward the tabletop to release
safety lock position. (See Figure 5)
Figure 5
3. To close, grasp edges of table and pull upward
in one continuous motion toward center. Ensure
storage latch is engaged. (See Figures 6-7)
Figure 6
Figure 7
1-800-295-5510
uline.com
1221 IH-9855