Omega MeGo PBL1000BD Mode D'emploi page 6

DO NOT PLUG IN OR UNPLUG WITH WET HANDS.
It may cause an electric shock or an injury.
DO NOT USE WITH OTHER THAN RATED VOLTAGE.
It may cause an electric shock, a fire or abnormal performance.
If the voltage is different, it may shorten the life of the motor or cause
a failure.
PLUG THE POWER CORD CORRECTLY AND PUSH IT TIGHT IN A WALL SOCKET
It may cause electric shock or a fire.
NEVER ALTER THE APPLIANCE. ALSO, DO NOT DISASSEMBLE OR REPAIR BY
YOURSELF. DO NOT INSERT FINGERS, FOREIGN SUBSTANCES OR OBJECTS SUCH
AS PINS INTO GAPS OR HOLES IN THE BASE. It may cause a fire, an electric shock or a
failure. For any technical support,contact the authorized local Customer Care Center.
DO NOT MOISTEN THE BASE OR SPLASH WATER ON THE BASE.
Be careful not to let any liquids or other substances get into the switch on the appliance.
WHEN THE POWER CORD, WIRE IS BROKEN OR DAMAGED OR THE PLUG-IN PART
BECOMES LOOSE, DO NOT OPERATE IT. It may cause an electric shock, a fire
or an injury.
FOR SAFETY, MUST DO GROUND CONNECTION DO NOT DO THE GROUNDING ON
GAS PIPE, PLASTIC WATER PIPE, TELEPHONE WIRE, ETC. It could cause an electric
shock, a fire, or a malfunction and an explosion. Be sure to use the socket with ground
connection.
WHEN DETECTING A GAS LEAK, DO NOT INSERT THE POWER CORD INTO ITS S LOT.
OPEN THE WINDOW TO VENTILATE FULLY AND IMMEDIATELY. It may
cause an injury or a failure.NEVER PUT A FINGER, A FORK OR A SPOON ETC. INTO
BLENDER
It may cause an injury or a failure.
DURING THE OPERATION, DO NOT ATTEMPT TO MOVE THE BASE, DISASSEMBLE
PARTS AND TRY TO LOCK THEM. It may cause an injury or a failure. In the event this is
needed, switch off first and unplug the power cord.
WHEN USING THE APPLIANCE, BE CAREFUL FOR A NECKTIE, LONG NECKLACE,
SCARF ETC. IS NOT ENTANGLED INTO FEEDING TUBE.
It may cause an injury, a failure or a breakage.
5