Maintenance - Omega MeGo PBL1000BD Mode D'emploi

8. Turn the cup upright and remove the Blade Assembly by twisting the blade assembly
counterclockwise. Be sure to store the Blade Assembly attached to an empty cup when not in use.
9. Place the Flip Top lid onto the cup, twist to seal and enjoy!
10. Make sure that the motor base is unplugged when not in use.
BLENDER BLADE FUNCTION DESCRIPTION:
1. Blender Blade fits both blending cups 32 oz cup and 27 oz cup
2. Blender Blade Can make nutritious fruit smoothies, shakes, dips and dressings!
MAKING NUTRITIOUS SMOOTHIES:
1. Prepare fruits and vegetables by chopping into medium sized chunks.
2. place in cup and add in liquid of your choice, water, milk, non-dairy milks, coconut water
are all suggested.
3. Remember not to fill past the MAX FILL line.
4. Add ice if desired.
5. Blend for 20-30 Seconds and Enjoy!
CAUTION: DO NOT process dry ingredients without adding liquid to the cup.
This product is not intended for dry blending.
CARE AND MAINTENANCE
HOW TO CLEAN
CAUTION: Make sure that the motor base is unplugged from the power source before
inserting or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into water or any other liquid.
1. Separate/remove all parts from each other.
2. Clean the motor base with a damp cloth and wipe dry.
3. Remove the small plastic valves from the bottoms of the blending containers and place
the lids and containers on the top rack of your dishwasher. Wash on the normal cycle (do
not wash on the sanitize cycle). DO NOT wash the blending blade in the dish washer as high
temperatures may cause deformations to the gaskets.
Use Caution when handling the blade assemblies as the blades are very sharp.
CLEANING THE RELIEF VALVE:
1. Remove the relief valve from the blending cup by grabbing the top and pulling through the hole.
2. Hand wash the valve piece by using warm water and dish detergent.
3. Insert the valve back into the hole.
4. Additional valves are included in, replace as needed.
HOW TO STORE/RESETTING MOTOR THERMOSTAT
To reset appliance, follow the resetting procedure below:
1. Unplug the appliance from the electrical outlet.
2. Remove and empty the cup and ensure that no food is jamming the cutting blades.
3. Allow the appliance to cool for approximately 30 minutes.
4. Re-install the cup onto the base and re-plug the appliance into the electrical outlet.
5. Proceed to use the appliance as before while making sure not to exceed the recommended maximum capacities.
9