Front USB Connector: JUSB4
USB 3.0 port s backward-compatble wth USB 2.0 devces. Supports data transfer rate
up to 5 Gbt/s (SuperSpeed).
USB 3.0 Bracket (optonal)
Important
•
Note that the pns of VCC and GND must be connected correctly to avod possble
damage.
•
If you want to use a USB 3.0 devce, you must use the USB 3.0 cable to connect to
the USB 3.0 port.
Front Panel Audo Connector: JAUD1
Ths connector allows you to connect the front panel audo and s complant wth Intel
Front Panel I/O Connectvty Desgn Gude.
* The MB layout n ths figure s for reference only.
®
En-17