Installation And Mountng - Cameo CLDROPB1 Manuel D'utilisation

INSTALLATION AND MOUNTNG

Thanks to the wide stand and mounting bracket, the spotlight can be positioned in a suitable location on a level surface. Installation on a
traverse is possible with a traverse clamp, which is attached to the mounting bracket (A). Suitable traverse clamps are optionally available.
Ensure firm connections and secure the spotlight by attaching a suitable safety cable to the securing lug on the mounting bracket. When
installing on a truss, ensure that the mounting bracket is securely attached to the spotlight housing with the four T10 Torx screws (B).
Important safety notice: Overhead mounting (especially above people) requires extensive experience, including calculation of
the load limit values of the installation material, and regular safety inspection of all installation materials and spotlights. If you do
not have these qualifications, do not attempt to perform an installation yourself. Refer instead to a qualified professional.
In order to effectively use the tilt function with the tilt screw when using as an uplight, and to achieve a more inconspicuous look, you
must use a suitable tool to remove the mounting bracket by releasing the four T10 Torx screws (B) that secure the mounting bracket to the
spotlight housing.
14
B
A
B