Migo PLUTO Mode D'emploi page 7

EN
SEAT PARTS
Frontview
Adjustable
head support
Belt guide
Shoulder pad
Armrests
Isofix connectors
Backview
Extension lever for the
head support
Shoulder pad frame
Isofix connector
extension
- 12 -
Belt guide of the
3-point belt
Shoulder belt
Comfort insert
Belt lock
Belt lock pad
Central
belt adjustment
Head support
adjustment
Top-Tether
Shoulder belt
Belt frame
Isofix connector
USE OF THE CHILD CAR SEAT
Adjustmentofthebelt
•
To loosen the belt, press the button under the seat
cover of the front belt adjustment with one hand.
Pull the belt towards you with your other hand.
•
To tighten the belt, pull on the front adjustment
belt.
Adjustmentofthehead
supportheight
•
Depending on the height of the child, the head
support can be adjusted up to 10 times.
•
Loosen the belt and pull the red lever upwards. At
the same time, move the head support upwards
or downwards. The height of the head support can
thus be adjusted 5 times.
•
Release the lever and ensure that the head support
is locked.
•
If the child is 105 cm or taller, the head support can
be adjusted another 5 times. To do so, first press
the extension lever on the back. Then proceed as
before by pulling the head support adjustment
upwards.
Opening/closingthebelt
•
To unlock the belt, press the red button of the
buckle and separate the two tongues of the buckle.
•
To lock the belt, first connect the two tongues of
the buckle and then insert them together into the
buckle.
- 13 -
Loosening Tightening
the belt the belt
EN