ZSP650MAN
EXTRAORDINARY MAINTENANCE
REPLACEMENT OF BRUSHES
Central Brush:
- Remove completely the front basin for wastes;
- Unscrew the two clamping screws (1);
- Extract the central brush (2) as shown in Figure;
- Assembly the new brush following the above-mentioned stages backwards.
2
1
Lateral Brush:
- Lift the brush support arm to a vertical position.
- Unscrew fastening screws (1) and remove the worn brush.
- Reassembly the new brush following the above-mentioned stages backwards.
N.B.: After installing new brushes, check their height. If necessary, adjust
them.
1
26