Use - Beurer BARBERS CORNER HR 2000 Mode D'emploi

7. Use

Removing nose/ear hair
WARNING
Do not use the device if the miniature
blade is bent or damaged.
1. Take the protective cap off the
miniature blade.
2. Slide the ON/OFF switch
switch on the device.
3. Bring the tip of the miniature blade
slowly and carefully to the front
section of the nostril or ear.
4. Remove the nose or ear hair carefully,
using small, circular motions.
5. When you are finished with the
application, slide the ON/OFF switch
down to switch off the device.
51
up to