Troubleshooting - Furrion FIH1ZEA-BG Manuel D'instructions

Troubleshooting

Always contact a qualified service technician to replace the power cord if it is damaged,
never replace the power cord by yourself.
Problem
Cooktop does
not work.
Cooktop does
not Heat.
Cooktop turns
off while in
cooking.
The fun keeps
running for one
minute after the
unit has been
switched off.
"U" appears
on the digital
display.
"E0" appears
on the digital
display.
Possible Cause
Cooktop controls are locked.
Power outage.
No cookware or improper
cookware.
Inproper cookware size.
The cookware is not properly
located on the cooking zone.
No power to the cooktop.
The cooktop internal heat
sensor detected a high
temperature inside
the cooktop.
Liquid or object on the
control area.
The electronics are
cooling down.
No cookware is detected on
the cooking zone after
10 seconds.
IGBT overheating.
Solutions
Deactivate the lock function.
Check the house power supply wires.
Contact the dealer.
Make sure the cookware is centered on
the cooking zone and the material of the
cookware is cooktop compatible.
Replace with a proper size of cookware.
The bottom of the cookware should cover
the cooking zone completely.
Make sure the cookware bottom is flat and
the cookware is centered on the cooking area.
See "cooktop does not work" section.
Make sure the cooktop vents are not
blocked.
Clean up the spills or remove any objects
on the control area. Restart the unit.
This is normal.
Make sure the material of the cookware is
cooktop compatible and it is centered on
the cooking zone.
Turn off unit to allow IGBT to cool.
Restart the unit.
12