Defrosting; Replacing Led Lighting; Repositioning The Door - Franke FSDF 300 NF XS E Mode D'emploi

Defrosting

Your freezer has fully automatic defrosting. The water
formed as a result of defrosting passes through the
water collection spout, flows into the vaporisation
container below the condenser and evaporates there.

Replacing LED lighting

If your refrigerator has LED lighting, contact the help desk as this should be changed by
authorized personel only.
TRANSPORTATION AND CHANGING OF
PART - 5.
INSTALLATION POSITION
• The original packages and foamed polystyrene (PS) can be retained if required.
• During transportation, the appliance should be secured with a wide string or a strong
rope. The instructions written on the corrugated box must be followed while transporting.
• Before transporting or changing the installation
position, all the moving objects (ie, drawer, Ice trays,
...) should be taken out or fixed with bands in order
to prevent them from getting damaged.
Carry your freezer in the upright position.

Repositioning the door

• It is not possible to change the opening direction of your freezer door, if the door handle
on your freezer are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any handle.
• If the door opening direction of your freezer may be changed, you should contact the
nearest authorised service to have the opening direction changed.
evaporating container
EN - 41 -