Yamaha WaveRunner GP1300R 2003 Manuel D'atelier page 410

– +
ELEC
STARTING SYSTEM
Br
B
STARTER RELAY
1. Check:
• Brown lead terminal
• Black lead terminal
Loose → Tighten.
2. Check:
• Starter relay continuity
Out of specification → Replace.
Checking steps:
• Connect the tester leads between the
starter relay terminals as shown.
• Connect the brown lead terminal to the
positive battery terminal.
• Connect the black lead terminal to the
negative battery terminal.
• Check that there is continuity between
the starter relay terminals.
• Check that there is no continuity after dis-
connecting the brown or black lead.
MAIN AND FUEL PUMP RELAY
Refer to "IGNITION SYSTEM."
7-29
E