Technical Data; Declaration Of Conformity; Description Topvac; Technical Data Table - Komet TopVac Notice D'utilisation

Technical Data

5 Technical Data
5.1

Declaration of Conformity

We, the company
KOMET Maschinenfabrik GmbH
Am Filswehr 1
73207 Plochingen
Germany
hereby declare that the vacuum packaging machine TopVac (model 340) conforms to the
European Directives

2006/42/EC - Machinery

2004/108/EC- Electromagnetic Compatibility
and has been designed and manufactured according to the following standards.
This declaration shall no longer be valid in case of any modification to the machine without our
express approval.
Harmonised standards Title
Safety of machinery- Basic concepts, general principles for design.– Risk
DIN EN ISO
assessment and risk reduction
12100:2010
Ergonomics of the thermal environment - Methods for the assessment of
DIN EN ISO
human responses to contact with surfaces -
13732-1:2008
Part 1: Hot surfaces
DIN EN 1012-1
Compressors and vacuum pumps – Safety requirements
DIN EN 1012-2
EMC – Electromagnetic compatibility - Requirements for household
DIN EN 55014-1:2009
appliances, electric tools and similar apparatus - Part 1: Emission
EMC – Electromagnetic compatibility - Requirements for household
DIN EN 55014-2: 2008
appliances, electric tools and similar apparatus - Part 2: Immunity
DIN EN 60204-1: 2006 /
Safety of machinery – Electrical equipment of machines
DIN VDE 0113-1
Authorised to compile the technical file:
The CE sign was applied.
Plochingen, 01-01-2010
Peter Fischer, Managing Director
Operating Instructions - Translation
Fa. KOMET Maschinenfabrik GmbH, Harald Janke
5.2

Description TopVac

The TopVac vacuum packaging machines are manufactured according to KOMET
proved and tested high quality standards and are equipped with an electrical control
board, a high speed vacuum pump and a vacuum-stop function.
TopVac are chamber machines, with which vacuum-sealed, air-tight packages can be
manufactured. Products, which would be subject to unwanted change in the normal
atmosphere, are protected by means of vacuum packaging.
The filled vacuum bag is placed in the chamber with the opening flat on to the sealing
pad.
The vacuum and sealing temperature set-ups are done on the control board. The
vacuum and sealing (single sealing wire) processes are automatic and can be visually
controlled through the transparent cover window.
The vacuum pump creates low pressure in the chamber. When the set vacuum has
been reached, the bag is sealed.
The machines provide automatic cover opening upon completion of the packaging
procedure.
To remove moisture from the pump a service-program can be used. In approx. 30
minutes it will warm up the pump and remove the condensed water from the oil.
Delivery contents:
The machine itself with a transparent cover window

2 inserts for height variations

Oil (if not already in the machine)
3
6 m /h pump: 0,2 l

Operating Instructions Manual

Hexagon socket head cap screw driver (for oil filling and oil drain screw)
Please fill in the blank spaces below with the machine number. You will find it at the
tag positioned at the back of the machine.
340 _ _ _ _ _ _
Machine number:
19 04 272 - 01.01.2012
_ _
Eng - 7/20