Maintenance, Service And Repair; Modifications On The Machine; Fire Prevention Advices; Cleaning Of The Machine - Komet TopVac Notice D'utilisation

General Safety Instructions
3.5

Maintenance, Service and Repair


Unplug the machine from the power supply before performing any of the activities
mentioned above.

The set-up, maintenance and inspection should be performed according to the
schedule and instructions contained in this manual.

Damages on the machine should be repaired by a specialist or by your dealer.
3.6

Modifications on the Machine


No modifications or changes on the machine should be performed without the
manufacturer approval.

Machine parts that have faults or flaws should be immediately substituted.

Only use original KOMET components for changing spare parts and parts that
wear down.
3.7

Fire Prevention Advices


Do not cover aeration holes.

Do not place the machine near inflammable or combustive elements.
3.8

Cleaning of the Machine


Use and put the devices and materials in the trash according to the regulations in
your country.
3.9

Noise Level


The noise level produced by the machine is under 70 db (A).

3.10 Dangers resulting from the Pneumatic Spring on the Chamber Cover


Under no circumstances should you undo the pneumatic spring. Pneumatic springs
have an extremely high internal pressure (up to approx. 300 bar).

Prior to disposal the pneumatic spring must not be under pressure. Please request
our disposal instructions!
Operating Instructions - Translation
19 04 272 - 01.01.2012
Eng - 5/20