V 4.0
VIBRATION PRECAUTIONS
1.
This tool vibrates during use. Repeated or long-term exposure to vibration
may cause temporary or permanent physical injury. Take frequent breaks
when using the tool.
2.
If you feel any medical symptoms related to vibrations (such as tingling,
numbness and white or blue fingers), seek medical attention as soon
as possible.
3.
Wear suitable gloves to reduce the effects of vibration.
4.
DO NOT use this tool before consulting a physician if one of the
following applies:
a. Pregnant
b. Impaired blood circulation
to the hands
c. Past hand injuries
POWER TOOL PRECAUTIONS
1.
Do not allow the tool to run without load for an extended period of time, as
this will shorten its life.
2.
Do not cover the air vents. Proper cooling of the motor is necessary to
ensure normal life of the tool.
3.
Avoid unintentional starting. Ensure the switch is off when connecting to
the power source.
4.
Disconnect the power source before installing or servicing the tool.
5.
After making adjustments, make sure that any adjustment devices are
securely tightened.
6.
Remove adjusting keys and wrenches before turning the tool on. A wrench
or a key that is left attached to a rotating part of the tool increases the risk
of personal injury.
7.
Never force the tool. Excessive pressure could break the tool, resulting in
damage to your workpiece or serious personal injury. If your tool runs
smoothly under no load, but does not run smoothly under load, then
excessive pressure is being used.
Visit www.princessauto.com for more information
20 in. Floor-Mount Drill Press
d. Nervous system disorders
e. Diabetes
f. Raynaud's Disease
8654402
5