Publicité
Les langues disponibles
Les langues disponibles
8654402
3.
Wear gloves that provide protection based on the work materials or to
reduce the effects of tool vibration.
a.
Do not wear gloves when operating a tool that can snag the material
and pull the hand into the tool.
4.
Wear protective clothing designed for the work environment and tool.
5.
Non-skid footwear is recommended to maintain footing and balance in the
work environment.
6.
Wear steel toe footwear or steel toe caps to prevent a foot injury from
falling objects.
7.
Wear the appropriate rated dust mask or respirator.
8.
This tool can cause hearing damage. Wear hearing protection gear with an
appropriate Noise Reduction Rating to withstand the decibel levels.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs, alcohol
or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3.
Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
4.
Support the workpiece or clamp it to a stable platform. Holding the
workpiece by hand or against your body may lead to personal injury.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for
an unintended purpose.
2.
Use recommended speed for drill accessory and workpiece material.
3.
The chuck key will self-eject if the drill press is started before it is removed.
4
20 in. Floor-Mount Drill Press
For technical questions call 1-800-665-8685
V 4.0
Publicité
