Power Fist 8654402 Manuel D'utilisateur page 19

V 4.0
4. Only use accessories intended for use with this tool.
5. Keep the tool handles clean, dry and free from oil/grease at all times.
6. Maintain the tool's labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CLEANING
1. Clean the external surfaces with a cloth after use.
2. Check that all air vents are unblocked.
3. Blow out the motor of accumulated sawdust with compressed air.
LUBRICATION
NOTICE! NEVER use a penetrating oil to lubricate the tool. Penetrating oil
may act as a solvent that can break down the grease and cause the tool to
seize up.
Inspect and lubricate the tool when required. Lubricate the table support
mechanism, rack and spindle splines. Ball bearings are factory packed with
grease and do not require lubrication.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
Visit www.princessauto.com for more information
20 in. Floor-Mount Drill Press 8654402
19