Sherco CityCorp 4T 125cc Manuel Du Propriétaire page 53

Air filter
1. Remove the seat.
2. Remove the air filter cover (1).
3. Remove the air filter (2).
4. Clean the element with soap and water,
squeeze the element to remove any
excess water. Allow to dry completely.
5. Impregnate the element with specialair
filter product.
6. Reinstall the air filter element.
7. Reinstall the cover, making sure that it
makes good contact with the airbox.
8 Reinstall the seat.
Brake pad wear
Remove both pads, if one or both pads
measure less than 1mm they should be
replaced.
Brake fluid level
If the brake fluid level is below the minium
level, add DOT 4 brake fluid to the maximum
mark.
Always use the same type of brake fluid.
53