Sherco CityCorp 4T 125cc Manuel Du Propriétaire page 41

1.0 DEFINITION OF COMPONENTS
The unit comprises:
A digital LCD display
Three LED indicators
A separate control pulsator is also required.
Backlighting is effected using red LEDs.
1.1 LCD (liquid crystal display)
1.2 Pulsator
The impluse swith is on the left side of the handle-bar near the combi-
nation swith.
2.0 FU NC T I O N S A ND F EA TURE S
2.1 Current speed (speedometer) function
This function describes the function/display of current speed. The infor-
mation is always displayed on the 6-8 digits, accompanied by an indica-
tion through the use of the graphic bar (Fig. 2) ; if the measurement unit
selected is k.p.h. (default value), the relative digit is displayed; by pressing
the button and gaining access to the Set-Up menu, it is possible to select
m.p.h.; in this case, the speed indication will not be accompanied by any
text showing the unit of measurement selected.
41