Device Components; Bus Coupler - Aventics PROFINET-IO Mode D'emploi

72 AVENTICS | PROFINET-IO | R412015162–BDL–001–AE
About This Product
1
7
Fig. 2: Bus coupler with M12 sockets and plugs (left), bus coupler with 7/8" plug (right)
1 LED displays for diagnostic messages
2 Bus slave label
3 X71 (BUS)
4 X72 (BUS)
5 (left) X10 (POWER) M12 connection to supply power to the valve solenoids, logic, and inputs;
(right) protective cap
6 (left) Screw cap B for S4, S5, S6, S7 sliding switches (valve assignment to power supply);
(right) 7/8"connection to supply power to the valve solenoids
7 Screw cap A for S3 DIP switch
4.4

Device components

4.4.1
2
6
The bus coupler is designed only for use as a slave in a
PROFINET-IO network.
The bus coupler is directly connected to a controller, a switch,
or a further bus coupler via a cable that is compliant with the
PROFINET-IO specification.

Bus coupler

3
4
5
1
2
7
6
3
4
5