About This Product; Performance Specifications; Product Description - Aventics PROFINET-IO Mode D'emploi

70 AVENTICS | PROFINET-IO | R412015162–BDL–001–AE

About This Product

4 About This Product
4.1

Performance specifications

The bus coupler is used to control valves via the PROFINET-IO
fieldbus system. Input/output modules allow electrical input
and output signals to be connected via the valve system's bus
connection.
The bus coupler is designed only for use as a slave on
a PROFINET-IO bus system in accordance with IEC 61158.
4.2

Product description

The bus coupler makes it possible to control the VS via an
Ethernet system. In addition to connections for data lines and
power supplies, the bus coupler also enables you to set various
parameters, and permits diagnosis via LEDs. A detailed
description of the bus coupler can be found in the chapter
"Device components" from page 72.
The following overview outlines the entire valve system and its
components. The VS itself is described in its own operating
instructions.