Publicité
Les langues disponibles
Les langues disponibles
2Press theScan button to exit the channel scan.
Transmission and reception
1.On receiving status once power on.
2.Press the PTT key,and use the normal voice to speak, there should be 5 cm between
mouth and microphone.
3.After speaking, release the speaking PTT key, the machine is in the receiving status.
Adjust the volume
This machine has eight adjustable volume. Press the up or down key to adjust the volume
when the walkie talkie is under standby.
Call Tone
This machine has 10 call alerts sound available.
Call Tone Setting
1. When Standby, repeatedly press the Power / Menu key to call setting
the LCD screen.
2.Press the up or down key to select a call tone.
3.Press the Power / Menu button to save the settings and then enter other function setting,
or press PTT key to save and return to standby.
Send call alerts sound
1.When you need to send call alerts, press the PTT key twice quickly, Call alarm will be
send automatically.
2.When call alerts sound transmit complete, you can hear a short confirmation sound,
the unit will be back to radio standby status.
Hands-free function
The machine is equipped with hands-free function, no need to press PTT key , it can
automatically send voice.
1.When Standby, repeatedly press the Power / Menu button until the LCD hands-free
function label
appears.
2.Press the up or down key to switch hands-free on / off function, alternately shows "0,1,
2,3"， Appears on the display Hands-free indicator
1: noisy environments; 2: Under normal circumstances use: 3: quiet environments)
High/Low Power Selection
Standby, repeatedly press the Power / Menu button until the display the flashing LO or HI
(LO for small power 0.5W; HI for high-power 1W) .Then, click PTT to save.
Use earplugs (optional)
1.The walkie-talkie is set to non-hands-free mode.
2.Open the headset/charger jack on the side of the machine. Insert the headset.adjust the
microphone position
on
. (0: close hands-free function;
5
Automatic power saving feature
The machine is equipped with a unique circuit that can extend battery life， If you do not
receive any signal transmission within 5 seconds, it will automatically switch to
energy-saving mode, in this mode, you can still receive the signal)
Automatic squelch
The machine has automatic squelch function, provide high-quality voice effects, you can
hear more clearly.
Backlit display
Press any key, the LCD backlight is automatically displayed for five seconds.
Set the time
The unit has a 24-hour clock function set as follows:
1.Standby, press the Power / Menu button eight times until the hour digits displayed.
2.Press the up or down key to increase or decrease hour digits,
time can be set from 0 to 24 hours.
3. Press the power / menu button until the minute digits displayed.
4.Press the up or down key to increase or decrease the minute digits.
5.Press the power / menu button to enter other feature settings or press PTT key to save.
Set the alarm
1,Standby, repeatedly press the Power / Menu button until the alarm symbol
on the LCD screen. Press the up or down key to select turn off or turn on the alarm function.
2.Press the Power / Menu button to enter the set alarm hour time setting. Hours start
flashing, press the up key or down key to set alarm hours. Press the Power / Menu
button starts blinking minutes, Press up key or down key to set alarm minutes.
3.Press PTT key to save.
Key tone
1.Standby, press the Power / Menu button seven times press up key or down key
to select turn on or turn off the key tone..
2.Press PTT key to save.
Channel frenquency
USA channel Frequency
Channel
1
2
Fre quency
462.5625
462.5875
Channel
7
8
Fre quency
462.7125
467.5625
Channel
13
14
Fre quency
467.6875
467.7125
Channel
19
20
Fre quency
462.6500
462.6750
3
4
5
462.6125
462.6375
462.6625
9
10
11
467.5875
467.6125
467.6375
467.6625
15
16
17
462.5500
462.5750
462.6000
21
22
462.7000
462.7250
6
appears
6
462.6875
12
18
462.6250
Publicité
