Retevis RT35 Mode D'emploi page 2

Model RT35
Precautions
This unit conforms to telecommunications management standards, please observe the
following rules when using.
1. When Using this machine, you should not cause harmful interference and must accept
any received signal.
2. Any operation without permission is illegal, and maybe violet the telecommunications
management standards.Such as: change the frequency, change the transmit power,
extend the antenna, and so on.
3.This machine cannot be used in a hazardous environment, because it may cause an
explosion or fire.The hazardous environment include: gas stations, hospitals, airports,
the place without electrical shielding and so on.
4.Do not use soft cloth with detergent or solvent to wipe or clean the machine, use the dry,
acid-free soft cloth only.
5.In order to ensure the best voice quality, please keep 5cm distance between your mouth
and the machine and use your normal voice intensity. To get a better voice quality,
please turn the antenna upward.
6.The battery of this machine has an internal protect function.
Battery Usage
The mini walkie-talkie built-in lithium ion battery. The fittings include USB charger that can
charge the lithium battery, the charging method is as follows:
1.The charging jack is at the right side of the machine.
2.Connect the USB charger to a standard power socket.
3.Then connect the USB charger to the charging jack or headphone jack. During charging,
the battery indicator will be cycle moving. And when charging complete, the cycle moving
will be stopped.
Preface
Welcome to use this mini walkie-talkie, please read this user manual carefully in order
to understand all the operating function.
Walkie talkie
Battery
Clip
Double connector USB line
User's Manual
2
2
2
1
1
1
Menu mode LCD instructions
name
indicator
Channel / programming /
218
clock / volume / level
CTCSS / DCS
188
programming /volume
Battery power
display
Hands - free
instructions
Alarm indication
Open the intercom
function indication
Scanning
instructions
content
Channel programming / clock / volume level.
When the volume level is displayed in the
number of standby Press up or down key
When the minutes standby, press PPT key
to display after the current CTCSS / DCS
programming number. Standby display the
volume indication press up key or down key.
Show the number of cells, the more power
the more foot: High power
low battery
Display when the unit is in the VOX mode of
operation.
Display when the unit is in the alarm mode
of operation.
Display when the unit is in the open mode.
When close will not show this icon.
Display when the walkie-talkie under scan
function.
2