Assembly Instructions - Dyna-Glo SIGNATURE Serie Mode D'emploi

ASSEMBLY INSTRUCTIONS

CAUTION: This unit is HEAVY! Do not attempt to
handle this unit without assistance!
1. Remove the pre-installed bolt and washer from
the left lid hinge on the grill body (C) and slide the
lid (A1) off the grill body hinges.
2. Attach the left front leg (S) and right front leg (K)
using four M6 x 12 bolts (AA), four M6 nuts (BB)
and four M6 flat washers (CC) per leg.
Hardware Used
M6 x 12mm
AA
Bolt
M6 Nut
BB
M6 Flat Washer
CC
x 8
x 8
x 8
6
1
Pre-installed
Hardware
C
A1
2
S
AA
K
BB
CC