Assembly; Operation - Tineco FLOOR ONE S5 COMBO Serie Mode D'emploi

9 Brush Roller Cover
10 Tube
11 WiFi/Mute Button
12 Clean Water Tank Release
13 Clean Water Tank Handle
14 Clean Water Tank (CWT)
15 Brush Roller
16 Cleaning Tool
17 Dry Filter & Holder
18 Deodorizing & Cleaning Solution
19 Accessory Holder
20 Adaptor
21 Charging Base
22 Crevice Tool
23 2-in-1 Dusting Brush
24 Dustbin
Storage Tray (for Hand Vac)
25
* Only in selected models
Dirt Monitoring Loop
26
(Blue to red according to the dirt amount)
27 WiFi Indicator
28 AUTO Mode
29 DWT Full
30 MAX Mode
31 Floor Washer
32 CWT Empty
33 Brush Roller Tangled
34 Hand Vac
35 MAX Mode in Hand Vac
36 Dust Sensor Malfunction
37 ECO Mode in Hand Vac
38 Battery Indicator
39 Self-cleaning Icon
Fig.A

ASSEMBLY

How to Assemble/Disassemble
Note:
For water tank and brush assembly, please refer
to "Operation" and "Maintenance".
• To assemble, install the main body and handle
into the appliance until you hear a click.
Fig.B-1
• In the event that the handle need to be
disassembled, first remove the main body.
Press the spring to release the handle with a
tool (like a screwdriver) and lift the released
handle from the appliance.
Fig.B-2

OPERATION

Preparing for Use
• Before first use, please charge the appliance
for 3~4 hours (refer to "Charging Instructions"
for details).
* Based on results from Tineco lab tests. Lab
temperature 39.2°F (4°C) ~ 104°F (40°C).
1.Press the button and the appliance will start
in AUTO mode by default. Press it again to turn
off the appliance. Switch between AUTO and
MAX mode by pressing the
Fig.C-1
Tips:
• Solution mode/ Water Only mode:
Appliance starts with Solution mode by default.
Power on while the appliance is upright, long-
press for 3s to switch between the two
modes.
• Switch to Water Only mode:
LED Loop: Red → Blue (use water only)
• Switch to Solution mode:
LED Loop: Blue → Red (use cleaning solution)
2.The appliance will stop working when put
uprightly and start running again when you
recline.
24
button.