EN - T12 & T14
Thank you for purchasing this Trend product, we hope
you enjoy many years of creative and productive use.
Please remember to return your guarantee card within 28
days of purchase.
TECHNICAL DATA
Voltage
V AC
Type
Power input
W
No load speed
min 1
Router carriage
mm
Max cutter diameter
mm
(Portable Router)
Max cutter diameter
mm
in table
Collet size for Europe
mm
Collet size for UK
inch
and ROI
Weight
kg
Noise values and vibration values (triax vector sum) according
to EN62841 2 17:
dB(A)
L
(emission sound
PA
pressure level)
dB(A)
L
(sound power
WA
level)
K (uncertainty for the
dB(A)
given sound level)
Vibration emission
2
m/s
value a
=
h,hv
Uncertainty K =
2
m/s
The vibration and/or noise emission level given in this
information sheet has been measured in accordance
with a standardised test given in EN62841 and may be
used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
WARNING:
The declared vibration and/or
noise emission level represents the main applications
of the tool. However if the tool is used for different
applications, with different accessories or poorly
maintained, the vibration and/or noise emission may
differ. This may significantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the
T12EL
T12E
T14E
115
230
230
1
1
1
2100
2300
2300
9000
9000
9000
22000
22000
22000
2 column
2 column
2 column
50
50
50
50
50
86
-
12
12
1/2
1/2
1/2
6.4
6.4
6.5
94.2
95.1
95.1
105.2
106.1
106.1
2.5
2.5
2.5
4.1
3.1
3.1
0.31
0.31
0.31
EN - T12/T14
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of work
patterns.
EC DECLARATION OF CONFORMITY
MACHINERY DIRECTIVE
T12E & T14E
Plunge Router
Trend Tool Technology Ltd declares that these products
described under Technical Data are in compliance with:
2006/42/EC, EN 62841-1:2015 + AC:2015; EN 62841-2-
17:2017.
These products also comply with Directive 2014/30/EU
and 2011/65/EU. For more information, please contact
Trend Tool Technology Ltd at the following address or
refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
Trend Tool Technology Ltd
Trend Tool Technology Ltd
Unit 6 Odhams Trading Estate
St Albans Road, Watford
Herts, WD24 7TR
United Kingdom
01/11/21
UK DECLARATION OF
CONFORMITY
THE SUPPLY OF MACHINERY
(SAFETY) REGULATIONS 2008
T12E & T14E
Plunge Router
Trend Tool Technology Ltd declares that these products
described under "technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008,
S.I. 2008/1597 (as amended), BS EN 62841-1:2015 +
AC:2015; BS EN 62841- 2-17:2017.
-8-
Neil McMillan
Technical Director
Technical File Contact
Trend Tool Technology Ltd
3rd Floor, Kilmore House,
Park Lane, Spencer Dock,
Dublin 1, Ireland