Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
CUSTOM WOOD DOOR PANEL
34 | INSTALLATION
!
If stainless steel panel is installed, skip "Custom Wood Door Panel" section.
1
Remove screws and the top metal
bracket using the Phillips screwdriver.
Remove and place them aside. Skip
this step and go to the step 4 if the
door reversal has been completed.
2
Remove the top and bottom end caps
using the Phillips screwdriver and
place them aside.
3
Reinstall top metal bracket using
screws removed in the step 1.
4
Lightly press the custom panel onto
the door using double sided adhesive
tape. Adjust height of the panel to
align with the adjacent cabinetry. Press
the panel firmly against door.
Publicité
Chapitres
Table des Matières
