Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DOOR REVERSAL
Plastic screw cover
5
Reinstall the plastic screw cover to
original locations on the hinges.
6
Slide the door onto the hinges. Using
Torx T25 screwdriver install the screws
(removed in the step 6 of "Removing
the Hinges" section) onto the door.
Reinstall the top and bottom end caps
7
on the door (the top right end cap is
now the bottom left end cap and vice
versa).
NOTE: For custom wood install skip
this step.
8
Reinstall the top metal bracket on the
door.
NOTE: For stainless steel panel install
skip this step.
WARNING
Excessive Weight Hazard
Use two or more people to move and install
ice maker.
Failure to do so can result in back or other
injury.
9
Return the ice maker back to upright
position.
DOOR REVERSAL | 21
Publicité
Chapitres
Table des Matières
