Cleaning And Maintenance; Safety Information - CASO DESIGN MCDG 25 Master Mode D'emploi Original


Setting the cooking time
Set the cooking time by turning the Time/Menu control dial.

After selecting the program, press the button Start/Quick Start, to start the
preset cooking programme.

End of the cooking programme
Once the end of cooking timer is reached, four signal tones will be emitted and END will
appear in the display.

16 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.

16.1 Safety information

Please observe the following safety notices, before you commence with cleaning the
device:
► The appliance must be cleaned regularly and any food residues must be removed.
Insufficient cleanliness of the device can lead to the destruction of the surface, which for
its part can have a negative impact upon the service life of the appliance and can lead
to a dangerous condition of the appliance as well as fungal and bacterial contamination.
► Switch the oven off prior to cleaning it and unplug the plug from the wall power outlet.
► The cooking chamber is hot after it is used. There is a danger of burns! Wait until the
device has cooled down.
► Clean the cooking chamber after use as soon as it has cooled down. Extended waiting
unnecessarily complicates cleaning and can make it impossible in extreme cases.
Excessive accumulations of dirt can even damage the device under certain
circumstances.
► If dampness penetrates into the device, this can damage the electronic components.
Please ensure that no liquid can enter the interior of the device through the ventilation
slots.
► Do not use any aggressive or abrasive cleaning agents or solvents.
► Do not scrape off stubborn dirt with hard items.
Starting the cooking programme
Attention
69