Alesis Fusion 6HD Guide D'installation Rapide page 31

Recording Tracks...New Audio Track
The Fusion is also an audio recorder. You can record up to eight tracks to play along with your
synth tracks. Follow these steps to record an audio track:
1. Press the SONG mode button. This will take you to the top level of Song mode.
2. Press EDIT, and then press the Song tab on the upper-most left of the display. Your screen
will look like the one below:
3. Press the Add Track button (located on the lower right of the display).
4. With the cursor on "Synth", press the increment button below the control wheel. This will
change the selection from "Synth" to "Audio". Then press the "Ok" button. This will create a
new track for recording audio. Your display will now look like this:
5. Plug in an audio source to multi-track input 1 on the back of the Fusion. Use something with a
line output level, such as another synthesizer or a CD player.
6. Press the "Song" tab button and then the "Record" button.
7. The display will show input level meters for tracks 1 and 2. Play your audio source into the
Fusion. You should see the meter for track 2 (audio track 1) moving at the bottom of the
screen.
8. When you are ready to record, Press "Rec" and "Play" simultaneously. The metronome will
count-down and then the Fusion will start recording your audio as it is playing into the inputs.
9. After you finished recording your audio press "Stop" and "Locate" to go to the beginning of your
song. You should be able to hear your audio tracks playing back.
29