Alesis Fusion 6HD Guide D'installation Rapide page 23

Using Mix Mode
The Fusion's Mix Mode is where you assemble your "band" for a song, or create a keyboard
split. As you find the instruments you want to use, adding them to the "mix" is quite easy.
Assembling your "band"...
One of the ways to create a Mix is locating your various programs in Program Mode. For this
example, we'll use piano, guitar, and bass to create a multi-timbral mix.
To begin, press Category when you're in Program mode, then press Guitar.
Then Press the Program mode button, then 2. Your screen should look like the one below.
1. Press EDIT and Utility (using the soft-button on the left side of the LCD). Your screen will look
like the screen shot below.
2. Press "To Mix". This will add your guitar to your band. At this point your band consists of the
guitar you just added and a default piano. Note that a piano is assigned to the first part of a
mix by default so you don't need to worry about adding one in this case. If you don't want a
piano, change the piano part to any other program you'd like. Now, let's add a bass.
3. While in Program Mode, press Bass.
4. Now press 1. Your screen should look like the one below.
5. Press EDIT and go to the Utility tab.
6. Use the INC/DEC buttons to select your "To Mix" options and select "Add to Current Mix."
Press the "To Mix" soft button. This will add your bass to your band. Your band now consists of
piano, bass, and guitar.
7. To add additional instruments, repeat this process.
\
21