How To Order - Cequent Performance Products TOUGH & TRUSTED BULLDOG DCH Serie Manuel D'instructions

Maintenance
3.2 Brake Adjustment
For DCH650/800
It does not require any adjustment for DCH650/800 at any circumstance.
For DCH1200
Under normal use, the brake mechanism will not require any adjustment. If the brake fails to hold a
load, the brake disc may be worn and require replacement. When the brake wears to the point that the
load begins to slip, the brake can be adjusted as follows:
1. Loosen the bolt on the brake cover and take out the retaining rings.
2. Insert spacers/washers to maintain the brake gap between to be for 2.-0.5 for DCH1200.
3. Make sure to keep the clutch base plate rotated counter-clockwise by 140 degree for DCH1200.
Figure 22 - Brake Adjustment - DCH1200 Only
3.3 Lubrication
All moving parts in the hoist are permanently lubricated at the time of assembly. Under normal con-
ditions factory lubrication will suffice. If re-lubrication of gear box is necessary after repair or disas-
sembly use Shell EP2 or equivalent grease. Regularly lubricate Clutch T-handle with light oil. Never
lubricate the brake system.
3.4 How To Order Replacement Parts
Use only Cequent Performance Products' parts or parts of equal quality for repair. Replacement
parts are available through Cequent Performance Products' Tech Service Department,
800-632-3290. Please specify product model number.
17
CEQUENT PERFORMANCE PRODUCTS, INC. •
™
F3839-00 REV C (4782) 08/15