Storage; Maintenance; Electrical & Electronic Equipment Disposal; Technical Specification - Tornado 98494 Mode D'emploi

Storage

Always switch off and wipe down and dry the machine after use. Store the machine in a dry indoor area
only.

Maintenance

WARNING – BEFORE DOING ANY MAINTENANCE OPERATIONS OR ADJUSTMENTS, SWITCH
OFF THE MACHINE AND UNPLUG IT FROM THE ELECTRICAL SUPPLY.
The machine requires minimum maintenance apart from the following checks by a trained operator.
Charging Cord and Plug
Regularly inspect the sheath, plug and cord for damage or loose connection.
IMPORTANT – All other servicing and repairs should only be performed by an authorized service agent.
IMPORTANT – Should the machine fail to operate, please refer to the fault diagnosis section in the back of
the instruction manual. If the problem or remedy is not listed, please contact an authorized service agent.
Electrical & Electronic Equipment Disposal
Improper disposal may be harmful to the environment. Please refer to your local waste authority for
information on return and collection systems in your area.

Technical Specification

Charging Voltage
Voltage
Motor Rating
Working Width
Pad Diamter
Pad Speed
Handle Height
Sound Pressure Level
Weight (with batteries)
Weight (without batteries)

Accessories

Part
Spray Kit System

Fault Diagnosis

Fault
No lights are lit on charger
module.
Only Red LED on charge
module is lit.
Machine not working.
Machine wobbles or vibrates
excessively.
100-230V
24V
65HP
17 inches
17 inches
1500 rpm
42 inches
57 dB (A)
138 lbs.
50 lbs.
Part No.
05-4156-0000
Reason
Power failure
Charger not connected correctly
Switch interlock incorrectly
operated.
Current overload fuse blown
Pad worn or damaged
Pad centered on drive disc
Pad dirty
Incorrect pad selection
Description
Spray Cleaning Attachment
Remedy
Check the main fuse, the power
supply cord and plug.
Contact service agent
Check operating procedure
instructions.
Contact service agent
Renew pad
Place pad in correct position
Clean the pad
Contact pad supplier
8