Publicité
Les langues disponibles
Les langues disponibles
INTRODUCTION
•
CAUTION! Do read all safety & other instructions that have come with the MASTER work 1600 and with the power tools
you use for work. Failing to observe the safety & other instructions may cause electric shocks, fire and/or severe injuries.
• Do keep the operating instructions for future reference in a safe place.
TECHNICAL DATA
dimensions (put up for use):
dimensions (folded up):
worktop:
diameter of the clamping holes:
pattern of the clamping holes:
bore diameter of the slotted holes:
load-bearing capacity:
weight:
SYMBOLS AND THEIR MEANING
Warning against a general danger
Read the instructions!
Goggles must be worn.
Hearing protection must be worn.
Dust mask must be worn.
Pull the plug.
General information
ASSEMBLY TOOLS
1 Allen key: A/F 2.5
(included in scope of delivery)
INTENDED USE
• The MASTER work 1600 working table is intended for use as a workstation for machining workpieces (e.g. sanding, planing, drilling,
sawing, etc.).
• Workpieces can be clamped securely to the worktop using the clamps available in the wolfcraft range.
• When using mitre saws and the separately available wolfcraft drill stand (art. no. 5027000) on the table, the fasteners supplied must
be used.
•
CAUTION! It is only possible to use machines on which the workpiece is processed vertically from top to bottom.
•
CAUTION! Machines that apply lateral pressure to the working table should not be mounted.
• Observe the manufacturer's safety instructions for the machines used, as well as the safety instructions for the working table.
• When disposing of the MASTER work 1600, please observe local disposal regulations.
The user is liable for any damage or accidents resulting from improper use.
t
1110 x 765 x 863 mm
1110 x 765 x 200 mm
1035 x 695 mm
20 mm
128 / 128 mm (horizontal / vertical)
91 x 23 mm
120 kg
21 kg
Do not apply weight unevenly.
Maximum load: 120 kg
Do not use as a seat, ladder or support.
Do not stand on the working table.
Fasten stationary devices to the table using bolts!
Do not saw more than 5 mm into the table!
1 spanner: A/F 10
(not included in scope of delivery)
15
Publicité
