Publicité
Les langues disponibles
Les langues disponibles
Do not attempt to attach the magnetic plug permanently to
‒
the appliance.
•
Ensure the oil container is in place, then turn the oil filtration control
knob to FILTER OIL position to empty the oil reservoir (see Oil
filtration).
•
Place the basket on a clean, flat and heat resistant surface.
Danger of burns!
Ensure the basket cooled down completely before touching its
‒
surface and attempting to remove the basket handle.
Ensure the oil cooled down completely before emptying the oil
‒
reservoir into the oil container.
•
Remove the basket handle from the basket.
•
Remove the control panel assembly from the oil reservoir. Carefully
clean the control panel assembly and immersion heater with a
damp cloth.
•
Pull the oil filter cover from the oil reservoir and then remove the oil
reservoir from the housing.
•
Open the lid filter cover and remove both black and white filters.
•
Clean the appliance housing with a damp cloth.
•
Wash the lid, basket, basket handle, oil reservoir and oil filter cover
with hot soapy water or in a dishwasher. Rinse and dry carefully.
•
Dry all parts thoroughly after cleaning and before using the
appliance again.
NOTE:
If the oil container needs to be cleaned, ensure it is empty
‒
before attempting to clean (see Emptying the oil container).
Wash with hot soapy water or in a dishwasher. Rinse and dry
carefully.
Clean the filters every 3 months or after every 12 uses with hot
‒
soapy water. Do not clean in a dishwasher.
Dry all parts and surfaces thoroughly before use. Make sure that
‒
all parts and surfaces are completely dry before connecting the
appliance to a wall outlet. Even a small amount of water can
cause severe splattering of hot oil.
CLEANING THE FILTRATION SYSTEM:
www.KALORIK.com
19
FT 44466 - 180330
Publicité
