ASROCK K8SLI-eSATA2 Guide D'installation page 14

Les langues disponibles

2.5 SLI

Operation Guide

2.5 SLI

Operation Guide

This motherboard supports NVIDIA SLI

allows you to install two identical NVIDIA SLI

cards. Currently, NVIDIA SLI

operating system. Please follow the installation procedures in this section.

SLI

Technology Requirements

1. You should have two identical SLI

certified.

2. Make sure that your graphics card driver supports the NVIDIA

SLI

technology. Download the latest driver from the NVIDIA website (www.

nvidia.com).

3. Make sure that your power supply unit (PSU) can provide at least the

minimum power required by your system.

Enjoy the benefit of SLI

Step 1.

Adjust the jumpers on this motherboard to enable PCIE1 slot (PCIE x 8) and

PCIE3 slot (PCIE x 8). Please refer to the previous section "Dual Graphics

Feature" for proper jumper setting.

Step 2.

Install the identical SLI

because different types of graphics cards will not work together properly.

(Even the GPU chips version shall be the same.) Insert one graphics card

into PCIE1 slot and another graphics card to PCIE3 slot. Make sure that the

cards are properly seated on the slots.

Step3.

If required, connect an auxiliary power source to the PCI Express graphics

cards.

Step4.

Align and insert the SLI Bridge to the goldfingers on each graphics card.

Make sure that the SLI Bridge is firmly in place.

1 4

ASRock K8SLI-eSATA2 Motherboard

(Scalable Link Interface) technology that

enabled PCI Express x 16 graphics

technology supports Windows XP and XP 64-bit

-ready graphics cards that are NVIDIA

-ready graphics cards that are NVIDIA certified