Ego Power+ PPX1000 Guide D'utilisation page 19

STARTING/STOPPING THE
13
TELESCOPIC POWER POLE
Lock-off Switch
(FIG.13)
To start the telescopic power
pole
Use either of the on/off trigger. Move the
On/off Switch
lock-off switch forward and then press
the on/off trigger. The tool will start. The
more pressure applied on the on/off
trigger, the higher the speed of the head attachment is.
To stop the telescopic power pole
Release the trigger to stop the telescopic power pole.
WARNING:
Always remove the battery pack from the telescopic power pole
during work breaks and after finishing work.
19
56-VOLT LITHIUM-ION TELESCOPIC POWER POLE — PPX1000/PPX1000-FC