Memory Channels; Storing A Channel And Its Settings; To Recall A Channel; Deleting A Channel - Midland CT3000 Mode D'emploi

Memory channels

CT3000 allows you to store up to 200 channels.
The channels let you store the frequency and data. So that you don't have to
re-program the same data repeatedly and you can immediately tune on the
desired channels.

Storing a channel and its settings:

1. Select the channel you want to store
2. Set all the desired parameters
3. Keep pressed the P control associated to V/M for 2 seconds, the display
will show the channel number. If the channel blinks blue it means that the
memory is empty and you can store the desired settings; while if it blinks
red the channel is already busy but the settings can be overwritten.
Rotate the main knob to select the channel in which you want to overwri-
4.
te the settings
5. Press V/M for 2 seconds for confirmation.

To recall a channel

1. Press the P button associated to the V/M function to enter the radio
memories
2. Turn the main knob to select the desired memory channel.
Note: In case you use the keypad you have to edit all 3 digits: for example, channel
1, you will edit "0","0", "1".

Deleting a channel:

1. Press the button associated to V/M function to enter the radio memories.
2. Select the channel you want to delete.
Keep pressed FUNC and the button associated to V/M function for 2
3.
seconds.
This function is available only in frequency mode.
20 | Midland CT3000 instruction guide