Main Features - Midland CT3000 Mode D'emploi

Main features

• VHF/UHF multi-band
• Operating modes: UHF-VHF, VHF-VHF or UHF-UHF
• Frequency bands (to set according to the country where you operate):
144-146 MHz & 430-440MHz (Rx / Tx).
• VHF and UHF bands displayed
• Channel number or channel number + frequency displayed
• Selectable output power: high (25W) middle (10W) or low (5W)
• Multi-color TFT display
• Flip display 180°
• Power supply 12,6V +/- 10%
• Metal chassis
• Programmable buttons
• Memory channel scan
• Digital automatic squelch adjustable in different levels
• Scan
• Dual watch
• Roger beep
• 200 memory channels
• TOT (time out timer)
• Adjustable backlight
• Automatic turning on/off
• Keypad lock
• Microphone with multi-function keypad and with RJ45 connector
• Software programmable (through the optional programming kit PRG-
3000 cod. C1352)
• 1750/2100/1000/1450Hz repeater access tones
• 104 + 104 DCS codes + 51 CTCSS tones
• Bandwidth selectable in 3 different levels 25 kHz/20 kHz/12,5 kHz
• Frequency inversion
• Frequency STEP:
kHz-30 kHz-50 kHz
• Frequency offset and offset direction selection
• Tx power level shown in the display
2 |
2,5 kHz-5 KHz-6,25 kHz-10 kHz-12,5 kHz-20 kHz-25
Midland CT3000 instruction guide