Troubleshooting - SilverCrest SPMR1 B1 Instructions D'utilisation Et Consignes De Sécurité

P Troubleshooting
Problem
The device cannot
be switched on.
Not charging
Poor reception or
interference
26 GB/IE/NI
Solution
Option 1: Replace the product with new
batteries/recargeable batteries.
Option 2: Check that the batteries/recargeable
batteries have been inserted into the battery
compartment with the correct polarity orientation.
Option 3: Charge the rechargeable batteries of
product inside battery compartment.
Option 4: Make sure press and hold the ON/
OFF button 13 for at least 3 seconds.
Option 1: Install new batteries/recargeable
batteries.
Option 2: Check that the batteries/recargeable
batteries have been inserted into the battery
compartment with the correct polarity orientation.
Option 3: Check if power adaptor (not included)
correctly plug into socket.
Option 4: Check if the both ends of the USB cable
are connected to the charging cradle and power
adaptor (not included) properly.
Option 1: Weak signal, move away from those
electromagnetic sources.
Option 2: Running out of batteries, replace with
new batteries or full charge your product again.
Option 3: Try to switch different channel to see if
quality can be improved.
Option 4: The distance between transmitter and
receiver is too long. Move the transmitter and
receiver closer and try again.
Option 5: No communication possible, check
channel settings.
Option 6: No playback, check volume setting.