Velleman CAMW7 Notice D'emploi page 5

Troubleshooting
10.
Image Sound
No No
Snow Noisy
Ghost
Normal
image
No
Normal TV system mismatch (PAL/NTSC), or night vision enabled
colour
Normal Noisy
11. Technical specifications
Camera
channels
sensor
resolution
TV lines
viewing angle
Night vision range
Automatic Gain Control (AGC)
Auto White Balance (AWB)
S/N ratio (AGC off)
min. illumination
transmission frequency
transmission power
modulation type
bandwidth
power supply
current consumption
Weatherproof level
dimensions
weight
General
operating temperature
storage temperature
storage humidity
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulted from (incorrect) use of this
device.
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
00 (12/08/2008)
Check power supply on camera and receiver.
Check whether camera and receiver are on the same channel.
Check whether the distance between camera and receiver is within
limits.
Possible interference with other devices.
Check whether the distance between camera and receiver is within
limits.
Possible interference with other devices.
4 (selectable)
CMOS
628 x 582 (PAL) / 510 x 492 (NTSC)
380
55°
7m
✓
✓
40dB
5 lux (F1.2) / 0 lux (IR on)
2,400MHz – 2,483MHz
10mW
FM
18MHz
8VDC / 300mA (adapter incl.)
max. 80mA / 200mA (IR on)
IP54 (main body)
Ø 49 x 52.5mm (main body)
±110g
-10°C~+50°C / +14°F~+122°F
-20°C~+60°C / -4°F~+140°F
<85% RH
CAMW7
Possible reason/solution
5