Velleman CAMW7 Notice D'emploi page 4

Features
6.
• weatherproof (IP54), especially suitable for outdoor home and business security
monitoring
• 12 IR LEDs for night vision
• 4 channels adjustable by setting dipswitches
• built-in microphone for audio monitoring
• transmitting range (depending on the surroundings): ±100 m without obstacles
• content:
1x camera + mounting hardware
1x voltage adapter
1x user manual
Overview
7.
Mounting
8.
•
The camera can be mounted against the wall or the ceiling or simply placed on a desktop
using the universal bracket (5).
Note: the hood (2) can be removed by sliding it forward. To remount, start at the rear end
of the camera and slide forward until the holes in the hood (2) and camera are in line.
•
When mounted on the ceiling, the universal bracket must be place on the top of the
camera (closest to antenna (1)). To do this, unscrew the universal bracket (5) from the
housing and screw it in the opening on top of the camera.
Operation
9.
•
Mount the camera in a location that needs to be monitored.
•
Apply power to the camera. Insert the jack from the adapter into the DC power jack (8)
of the camera.
•
When necessary (interference with other devices occurs or multiple cameras are used),
set the channel by opening the channel switch cover (6). There are 4 channels possible,
default channel is 1. Close the switch cover (6) after setting the switches.
•
In dark environmental conditions, the built-in Infra-Red lights (4) will automatically
become active. In this night vision mode, the image will become monochrome (black and
white). The night vision range is limited to 7m.
•
For information on the receiver, refer to the manual that cam with the receiver.
00 (12/08/2008)
CAMW7
1. Antenna
2. Hood
3. Lens
4. IR lights
5. Universal bracket
6. Channel switch
7. Microphone hole
8. DC power jack
Channel 1 Channel 2
2,414MHz 2,432MHz
4
Channel 3 Channel 4
2,450MHz 2,468MHz