Allmand Night-Lite V Serie Instructions D'installation page 4

4. LED Input 1 & 2 driver cord subassembly. Steps for
assembling the LED driver output cord to the Conssin
4-LED drivers panel assembly are as follows:
a. Loosen the Input 1 & 2 cord grip (Q, Figure 4).
From the kit contents, run the cord end without ring
terminals of one of the LED driver input cords (R,
Figure 4, Ref. 7) through the cord grip.
b. Locate the lever locks that are coming from the
inputs of the LED drivers. Connect the LED driver
input cord wires with the lever locks. Connect the
green wire (S, Figure 4) of the LED Input cord to
the green with yellow stripe wire coming from LED
drivers #1 and #2. Connect the black wire (T, Figure
4) to the brown wire coming from LED driver #1.
Connect the red wire (U, Figure 4) to the brown
wire coming from LED driver #2. Connect the white
wire (V, Figure 4) to the blue wire coming from LED
drivers #1 and #2.
4
U
4
5. LED Input 3 & 4 driver cord subassembly. Steps for
assembling the LED driver output cord to the Conssin
4-LED drivers panel assembly are as follows:
a. Loosen the Input 3 & 4 cord grip (W, Figure 5).
From the kit contents, run the cord end without ring
terminals of the remaining of the LED driver input
cord (X, Figure 5, Ref. 7) through the cord grip.
b. Locate the lever locks that are coming from the
inputs of the LED drivers. Connect the LED driver
input cord wires with the lever locks. Connect the
green wire (Y, Figure 5) of the LED Input cord to
the green with yellow stripe wire coming from LED
drivers #3 and #4. Connect the black wire (Z, Figure
5) to the brown wire coming from LED driver #3.
Connect the red wire (AA, Figure 5) to the brown
wire coming from LED driver #4. Connect the white
wire (BB, Figure 5) to the blue wire coming from
LED drivers #3 and #4.
5
T
V
S
Q
6. Tighten up all the cord grips on the open junction box.
7. Close up the junction box on the back of the LED
drivers panel assembly. Be careful not to pinch any
R
of the wires. Use the hardware removed in Step 2 to
secure the junction box in place.
Y
AA
Z
BB
W
X
www.allmand.com