Allmand Night-Lite V Serie Instructions D'installation page 12

5b
VV
8. Using the hardware (WW, Figure 6) and cover (YY,
Figure 6) removed in Disassembly Step 3, install the
cover onto the Night-Lite V-Series unit.
6
WW
9. The LED lamp installation is now complete. Close the
control box front panel, and make sure not pinch wires
when closing panel. Reconnect the battery cables to
the battery, start the engine, and turn on the lights to
make sure all are operating correctly.
10
VV
WW
UU
WW
YY
www.allmand.com