5. TROUBLE SHOOTING
Before you call for service review the trouble shooting tips first.
Problem
No power to juicer.
Motor has stopped.
16
Leaking from beneath
EN
the bowl.
Stain on the bowl,Strai-
ner, Spinning brush.
Squeaking noise
during operation.
Damage to the strainer.
Possibles causes
Juicer not plugged in.
Incorrect assembly.
Bowl has been overfilled with material.
Overuse has caused the motor to shut down
as a precaution to overheating.
Rubber plug on base of bowl not correctly
inserted.
Natural color from juicing materials.
Juicing noise from squeezing screw.
Frozen foods, ice, pips, seeds, unknown
substance or too much material in the bowl.
What to do
Check the juicer is
plugged in.
Reassemble the juicer
according to the
instructions.
Press
the
reverse
power button to try
and clear the clog. May
need to be try this a
few times.
Switch off and let the
motor
cool
before
using aging.
Rubber plug on base
of bowl not correctly
inserted.
This is perfectly normal.
To reduce discoloration
ensure you rinse and
clean the appliance im-
mediately after use.
This is perfectly nor-
mal. Ensure you do not
overload the juicer.
Ensure you read the
instructions
carefully
on the correct use of
the juicer. Do not over-
fill the juicer.