Symbols On The Machine - Anova MG246 Manuel D'instructions

2.SYMBOLS ON THE MACHINE

Read, understand and follow all warnings.
(1)
Warning! Kickback hazard. Be careful of the kickback of
(2)
the chain saw and avoid contact with the tip of the bar.
(3) Do not use the saw with one hand.
(4) Always use the saw with both hands
(5) You should wear ear, eye and head protection.
Read the operator's instruction book before operating this
(6)
machine.
.
Always wear anti-vibration and anti-cut safety gloves when
(7)
using this device.
Always wear slip resistant boots when operating the machine.
(8)
For safe operation and maintenance, symbols are embossed on the
machine. In accordance with these guidelines, be careful not to make any
mistakes.
(a). The "MIX GASOLINE" mixture fuel fill port Position: near
the fuel cap.
(b). The chain oil refill port.
Position: near the oil cap
(c). Operate the engine switch