Labels - Upright TM12 Guide De L'opérateur

Labels

L
ABELS
These labels shall be present and in good condition before operating the machine. Be sure to read, under-
stand and follow these labels when operating the machine.
HYDRAULIC FLUID
1 060197-000
2 101210-000
Model______________ Serial number:___________
Machine weight _______kg Mfg. date:_________
Maximum wheel load:________
Maximum allowable incline of machine when elevated:_____deg.
Occupants and equipment must not exceed the rated maximum
load:_____kg Maximum platform occupants: _____
Maximum allowable sIde force on platform:_____N
Maximum platform height:______m
Maximum platform reach:______m
Maximum allowable wind speed: ______m/s=Beaufort scale_____
Maximum hydraulic system pressure:_____bar
Maximum system voltage: _______Vdc
This machine is manufactured to comply with
Machinery directive 89-392/CEE
CAUTION: CONSULT OPERATOR'S MANUAL BEFORE USE.
061205-003
3 061205-003
5 005223-909
030768-001
6 030768-001
7 107050-900

9 107052-000
Page 14
060197-000
11 010076-901
12 065568-901
26,3 kg +
15 062562-951
USE OF THE AERIAL WORK PLATFORM: This aerial work platform is
intended to lift persons and his tools as well as the material used for the
job. It is designed for repair and assembly jobs and assignments at
overhead workplaces (ceilings, cranes, roof structures, buildings etc.).
All other uses of the aerial work platform are prohibited!
THIS AERIAL WORK PLATFORM IS NOT INSULATED! For this reason it is
imperative to keep a safe distance from live parts of electrical equipment!
Exceeding the specified permissible maximum load IS PROHIBITED!
Read operator's manual for more details.
The use and operation of the aerial work platform as a lifting tool
or a crane IS PROHIBITED!
NEVER exceed the manual force allowed for this machine.
Read operator's manual for more details.
DISTRIBUTE all platform loads evenly on the platform.
NEVER operate the machine without first surveying the work area for surface
hazards such as holes, drop-offs, bumps, curbs, or debris; and avoiding them.
OPERATE machine only on surfaces capable of supporting wheel loads.
NEVER operate the machine when wind speeds exceed this machine's
wind rating. Read operator's manual for more details.
IN CASE OF EMERGENCY push emergency stop switch to
deactivate all powered functions.
IF ALARM SOUNDS while platform is elevated, STOP, carefully lower platform.
Move machine to a firm, level surface.
Climbing up the railing of the platform, standing on or stepping from the
platform onto buildings or other structures, IS PROHIBITED!
Dismantling the swing gate or other railing components IS PROHIBITED!
Always make certain that the swing gate is closed and securely locked!
IT IS PROHIBITED to keep the swing gate or liftable bar in an open
position when the platform is raised!
To extend the height or the range by placing of ladders, scaffolds or
similar devices on the platform IS PROHIBITED!
NEVER perform service on machine while platform is elevated without
blocking elevating assembly.
INSPECT the machine thoroughly for cracked welds, loose or missing
hardware, hydraulic leaks, loose wire connections, and damaged
cables or hoses before using.
VERIFY that all labels are in place and legible before using.
NEVER use a machine that is damaged, not functioning properly, or has
damaged or missing labels.
To bypass any safety equipment IS PROHIBITED and presents a danger for
the persons on the aerial work platform and in its working range.
NEVER charge batteries near sparks or open flame. Charging batteries
emit explosive hydrogen gas.
Modifications to the aerial work platform are prohibited or permissible only
at the approval by UpRight.
AFTER USE, secure the work platform from unauthorized use by turning
the keyswitch off and removing key.
16 067195-002
19 014222-903
107052-000
010076-901
20
21
22
23
24
014222-903
25
THIS PLATFORM IS
NOT INSULATED
DIESE ARBEITSBÜHNE
IST NICHT ISOLIERT
CETTE PLATEFORME
N'EST ISOLEE
100102-900
066522-900
066522-900
068635-001
101208-001
INSIDE
INNSEITIG
L'INTERIEUR
107051-900
107053-000
107098-022 TM12 - Operation Manual
100102-900
107051-900