Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions
Vertical Wireless / Bluetooth Mouse M618X
Item No. 1887257
Intended Use
This USB mouse is designed for right-handed people and features programmable buttons and scroll wheel
functions. The bundled software is required to customize key and macro settings. The mouse is designed for
computers running the Windows
operating system.
®
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use
can result in short circuits, fires, electric shocks or other hazards. Read the instructions carefully and store
them in a safe place. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Mouse
• USB receiver
• USB Type-C
braided cable (1.4 m)
TM
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation mark in the triangle is used to indicate important information in
these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) General
• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other products which are connected
to the product.
• Make sure that the cable is not squeezed, bent, damaged by sharp edges or put under
mechanical stress.
• Arrange the cable so that it will not become a trip hazard.
• Consult an expert when in doubt about the operation, safety or connection of the product.
• Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
a) Rechargeable battery
• The rechargeable battery is permanently built into the product and cannot be replaced.
• Never damage the rechargeable battery. Damaging the casing of the rechargeable battery
might cause an explosion or a fire! Unlike conventional batteries/rechargeable batteries
(e.g. AA or AAA type), the casing of the LiPo rechargeable battery does not consist of a thin
sheet but rather a sensitive plastic film only.
• Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the
product into fire. There is a danger of fire and explosion!
• Charge the rechargeable battery regularly, even if you do are not using the product. Due to the
rechargeable battery technology being used, you do not need to discharge the rechargeable
battery first.
• Never charge the rechargeable battery of the product unattended.
• When charging, place the product on a surface that is not heat-sensitive. It is normal that a
certain amount of heat is generated during charging.
• Driver CD
• Operating instructions
Operating Elements
Mouse keys are not labeled on the product. Standard mouse key functions can be customized
after installing the driver software.
1
1
DPI button
10 Optical sensor
2
Scrolling wheel
11 LED charging indicator
3
Left
12 Charging port
4
Right
13 Shaft lock screw
5
Backward
14 2.4 GHz USB receiver
6
Forward
15 Channel select
7
Pivot joint
16 LED channel indicator
(B1, B2, B3, 2.4 GHz)
8
USB receiver slot
9
ON / OFF switch
Getting Started
a) Charge the Battery
• Connect the USB charging cable to a USB port that can provide a 500 mA charging current (e.g. a computer
or USB power adapter).
• Connect the other end of the cable to the mouse charging port (12).
• The LED charging indicator (11) will turn on when the battery is charging, and turns off when fully charged.
- A full charge cycle takes approximately 2.5 hours.
- Recharge the battery when the mouse becomes unresponsive.
b) Wrist Angle Adjust
Adjust the grip angle so that your hand, wrist and forearm are in an ergonomic position when using the
mouse.
• Loosen the shaft lock screw (13).
• Lightly grip the mouse and adjust the pivot joint (7) so your hand, wrist and forearm are lined up in a
comfortable and neutral position.
• Tighten the shaft lock screw (13) to fix the angle.
Operation
The optical sensor (10) will not work on all surfaces.
The mouse may leave marks on delicate surfaces.
Store the 2.4 GHz receiver in the magnetic slot (8) when not in use.
Strong transmitters and metal surfaces near the mouse can cause interference.
The distance between the receiver and mouse should be < 10 m.
a) Plug & Play
You can use the mouse without installing the driver software but will not have access to
advanced features such as key and macro settings.
Configure standard mouse settings through Windows Settings > Devices > Mouse.
b) Standard Mouse Key Functions
Key
Function
Left (3)
Click
Right (4)
Menu
Scrolling (2)
Scroll
Backward (5)
Next page in web browser
Forward (6)
Previous page in web browser
DPI Setting
The higher the mouse DPI, the faster the pointer speed.
DPI
LED
• Press the DPI button (1) to cycle through DPI sensitivity levels.
600
1 x flash
• The LED will flash to indicate which DPI has been selected.
1200
2 x flash
1600
3 x flash
3200
4 x flash
2
3
8
4
9
10
5
6
11
7
12
13
ON / OFF
B3
B2
You should install the included "Renkforce
M618X Wireless Mouse.exe" to access
custom key and macro settings.
14
15
16
B1
Publicité
